Ask Question About Product
UTD2102CM Digital Storage Oscilloscope
UNI-T's UTD2102CM digital storage oscilloscope is a 2 channel, 100MHz bandwidth, 1GS/s sampling rate device.
Features
1. 2 channels,1GS/s sample rate
2. 100MHz bandwidth, 32Mpts maximum memory depth
3. Waveform acquisition rate is up to 150,000wfms/s
4. Vertical sensitivity: 2mV/div~10V/div
5. Time-based range: 2ns/div~50s/div
6. Trigger modes: edge, pulse, runt, video, slope, alternate
7. V/A unit conversion, supports user defined probe ratio
8. Customized AUTO, fast captures the signals
9. Supports Y-Tand X-Y mode at the same time, can observe Lissajous waveform
10. Various frequency calibration signals: 100Hz/1kHz/10kHz
11. 34 kinds of auto measurements
12. Button lock: can lock or unlock any button on the device, and code can be set to avoid random alternation
13. Optional LA module
14. Standard interfaces: USB Host, USB Device, Pass/Fail
15. 7-inch TFT LCD, WVGA (800*480)
Accessories
Probe x2 (1:1, 10:1 switchable)
National Standard Power Cord
USB Connection Line
PC Software CD
Model |
MO00640283 |
|
Channels |
2 |
|
Bandwidth |
100MHz |
|
Sample Rate |
1GS/s |
|
Rise Time |
≤3.5ns |
|
Memory Depth |
32Mpts |
|
Waveform Acquisition Rate |
≥150,000wfms/s |
|
Vertical Sensitivity (V/div) |
2mV/div~10V/div |
|
Time-based Range (s/div) |
2ns/div~50s/div |
|
Storage |
Setup, Wave, Bitmap, CSV |
|
Trigger |
||
Trigger Frequency |
6 bits |
|
Trigger Modes |
Edge, Pulse, Runt, Video, Slope, Alternate |
|
Trigger Level Range |
Internal |
Center of the Screen±div |
EXT |
±1.2V |
|
EXT/5 |
±6V |
|
Suppression Range |
100ns~1.5s |
|
Edge Trigger |
||
Edge Mode |
Rising, Falling, Rising and Falling |
|
Pluse Trigger |
||
Trigger Mode |
Positive pulse width (greater than, less than or equal to); Negative pulse width (greater than, less than or equal to) |
|
Pluse Width Range |
20ns~10s |
|
Video Trigger |
||
Signal Mode and Line/Field |
Supports standard NTSC, PAL and SECAM signal mode, lines range is 1-525 (NTSC) and 1-625 (PAL/SECAM) |
|
Slope Trigger |
||
Trigger Mode |
Positive slope (greater than, less than or equal to); Negative slope (greater than, less than or equal to) |
|
Time Setting |
20ns~10s |
|
Measurements |
||
Cursor |
Manual Mode |
Voltage difference between the cursor (ΔV), Time difference between cursor (ΔT), reciprocal of ΔT(Hz) (1/ΔT) |
Tracking Mode |
Voltage value and time value of wave point |
|
Auto Measurements |
Allowed to display cursor in auto measurement |
|
Auto Measurements |
Maximum, Minimum, Peak to Peak Value, Top Value, Amplitude, Period Average, Average, Period Mean Square Root, Mean Square Root, Area, Period Area, Overshoot, Under shoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time, Falling Time, Pulse Width, Positive Pulse Width, Negative Pulse Width, Burst Pulse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF |
|
Mathematics Operations |
Add, Subtract, Multiply, Divide and Reverse Phase |
|
Storage Waveform |
10 groups of waveforms, 10 kinds of settings |
|
FFT |
Window |
Hanning, Hamming, Blackman, Rectangular |
Sample Point |
1024 points |
|
Lissajous Figures |
Bandwidth |
60MHz/100MHz |
Phase Difference |
±3 degrees |
|
Others |
||
Interface |
Standard Accessories: USB Host, USB Device, Pass/Fail; Optional: LAN, LA |
|
General Characteristics |
||
Power |
100~240V ACrms, 50Hz/60Hz |
|
LCD Size |
7 inches TFT LCD, WVGA (800×480) |
|
Product Color |
Ivory and Grey |
|
Product Net Weight |
2.9 kg |
|
Product Size (W×H×D) |
332mm×147mm×170mm |
|
Standard Access
|