Ask Question About Product
UTD2102CEM Digital Storage Oscilloscope
UTD2102CEM is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 32Mpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Features & Benefits
1. 100MHz bandwidth, 1GSa/s real-time sampling rate
2. 2 channels
3. 28Mpts memory depth
4. 20,000wfms/s waveform acquisition rate
5. 2ns/div~50s/div time-base
6. Trigger modes: Edge, Pulse Width, Runt, Over-amplitude, Slope and Video
7. Calibration signal output: 10Hz, 100Hz, 1kHz (default), 10kHz and 100kHz
8. Input calibration signal only by pressing a button
9. 10Mpts waveform recording
10. 8-inch TFT LCD, WVGA (800×480)
11. USB OTG and Pass/Fail interface
Accessories
Power cord, USB cable, 2 sets of passive probes (100MHz), PC software CD (manual and application software inside)
Specifications | MO00640272 | |
Channels | 2 | |
Bandwidth | 100MHz | |
Sampling rate | 1GS/s (single channel), 500MS/s (dual channel) | |
Rise time | ≤3.5ns | |
Memory depth | 32Mpts | |
Waveform acquisition rate | ≥20,000wfms/s | |
Vertical sensitivity (V/div) | 1mV/div~20V/div (1MΩ) | |
Time-based range (s/div) | 2ns/div~50s/div | |
Storage | Setup, Wave, Bitmap | |
Trigger | ||
Trigger frequency | 6 bits | |
Trigger mode | Edge, Pulse Width, Runt, Over amplitude, Slope, Video | |
Trigger Level range | Internal | ±15div from the center of the screen |
EXT | ±6V (adjustable) | |
EXT/5 | -- | |
Suppression range | 100ns~10s | |
Edge Trigger | ||
Edge mode | Rise, Fall, Rise and Fall | |
Pluse Width Trigger | ||
Trigger mode |
+Width (greater than, less than or in designated section); -Width(greater than, less than or in designated section) |
|
Pluse width range | 20ns~10s | |
Video Trigger | ||
Signal mode and Line/Field | Supports standard NTSC and PAL signal mode, line range is 1~525 (NTSC) and 1~625 (PAL) | |
Slope Trigger | ||
Trigger mode |
+Slope (greater than, less than or in designated section); -Slope (greater than, less than or in designated section) |
|
Time setting | 20ns~10s | |
Measurements | ||
Cursor | Manual mode | Voltage Difference between cursors (ΔV), Time Difference between cursors (ΔT), reciprocal of ΔT(Hz) (1/ΔT) |
Tracking mode | Voltage and time value of wave point | |
Auto measurement | Allowed to display cursor in auto measurements | |
Auto measurement |
Max, Min, Peak-Peak, Amplitude, Top, Bottom, Cycle Average, Average, Crms, RMS, Area, Cycle area, Overshoot, Preshoot, RPRE, FPRE, Rise Time, Fall Time, Frequency, Period, Pulse Width, +Width, -Width, Burst Width, +Duty, -Duty, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, 34 measuring parameters in total |
|
Storage waveform | 20 internal settings/waforms, 200 settings/waveforms in U disc, deep storage CSV in U disc | |
Others | ||
Interface | USB-OTG, Pass/Fail | |
General Characteristics | ||
Power | 100~240V ACrms, 50Hz/60Hz | |
LCD size | 8 inch TFT LCD; Display resolution: 800×RGB×480 | |
Product color | Ivory and grey | |
Product net weight | 3.35kg | |
Product size (W×H×D) | 336mm×164mm×108mm | |
Standard accessories | Power cord, USB cable, 2 sets of passive probes (100MHz), PC software CD (manual and application software inside) | |
Optional accessories | -- |