- Question:
- Hello! does this flowmeter has any international certification? greetings!
- Answer:
-
yes, it has2023-12-20 10:46:27
Ask Question About Product
Characteristics
TUF-2000H handheld ultrasonic flowmeter realizes non-intrusive measurement by simply clamp the sensors on pipe surface, with remarkable features of small size, easy to carry, no pressure drop and high accuracy. Widely applied in water supply, heat supply, hydro project, metallurgy, chemical industry, machinery industry, energy, etc.. for production monitoring, flow verification, real-time detecting, water balance adjustment, flow network adjustment, energy saving monitoring.
Characteristic:
1. High Accuracy measuring
· Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%
2. Small size, Lightweight
· Dimensions: 200×93×33mm; Weight:390g
3. Non-intrusive measuring
· Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.
4. Wide measuring range
· Several types of the transducer for selection, measuring pipe size from DN15mm to DN6000mm
5. Large LCD display
· Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc.
6. Built-in data logger
· Built-in 24K data logger, store over 2000 lines measuring data
Main Feature
Items |
Performance and Parameter |
|
Main Unit |
Principle |
transit-time ultrasonic flowmeter |
Accuracy |
Accuracy: over 1%-2%; Repeatability: over 0.2% |
|
Display |
4-line x 16-character LCD with backlight |
|
Dimension |
200*93*33cm: 390g |
|
Operation |
Support 16 key light touch keyboard and the Simulation keyboard software |
|
Data interface |
Insulate RS232 serial interface, upgrade the flow meter software by computer, support the MODBUS, etc. |
|
Signal Output |
1-way OCT output |
|
Special Cable |
Twisted-pair cable; Select the RS232 communication.; Generally, the standard is 5m*2, optional 10m*2 |
|
Pipe Condition |
Pipe Material |
Steel, Stainless steel, cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed. |
Pipe Diameter |
DN 15---6000mm |
|
Straight length pipe |
Transducer installation should be satisfied: upstream10D, downstream 5D, 30D from the pump. |
Items |
Performance and Parameter |
|
Measuring Medium |
Type of Liquid |
Water; Ultra-pure liquids; Solvents and other liquids |
Temperature |
Standard Transducer: -30--90℃; High-temperature transducer: -40--160℃ |
|
Turbidity |
under 10000ppm and less bubble |
|
Flow rate |
0--±10m/s |
|
Flow Direction |
Measuring two (plus-minus) direction of flow rate |
|
Working Environment |
Temperature |
Main Unit: -20--60℃ |
Flow transducer: -40--160℃; Temperature transducer: according to the customer’s demands. |
||
Humidity |
Main Unit: 85% RH |
|
Power Supply |
AC 110V-240V |