-200x200.jpg)
Ask Question About Product
Note: HTML is not translated!
Cable Tester
UT681 series handheld cable testers can be used to fast check if Ethernet/telephone/BNC/HDMI cables are conducting, short-circuit, crossed or open-circuit. They are ideal tools for technicians to install, maintain and inspect week current system circuit.
Features
1. LED status display
2. Auto check of open/short/crossover circuit
3. Scan/full display testing modes conversion
4. Single key operation
5. Manual/auto power off (after 10-minute inactivity)
6. Low battery indication
7. Power supplied by 9V battery
| Item | Function | Model | Description |
| MO00640253 | |||
| Test function |
To test for: HDMI/MINI-HDMI |
√ | |
| Scan test mode | √ | LED1~LED19, LED_S | |
| Full display test mode | √ | LED1~LED19, LED_S | |
| To test for the case of short circuit, crossover, open circuit, etc. | √ | ||
|
Ethernet cable: shielded/ unshielded test |
√ | ||
| Manual shutdown function | √ | ||
| Auto shutdown function | √ |
No operation within 10 minutes, the device will shut down automatically |
|
| Single key operation | √ | ||
| Power supply: 9V battery | √ | ||
| Low voltage detection | √ | About less than 7.2V | |
| Application environment | Working temperature: 0~40℃ | √ | |
| Storage temperature: -10~50℃ | √ | ||
| Working humidity : 20~80% RH | √ | ||
| Storage humidity : 10~90% RH | √ | ||
| Altitude: ≤2000 meters | √ | ||
| Safety standard | CE EN61326-1: 2013; EN61326-2-2: 2013 | √ |