Customer Service
0 item(s) - RM0.00

Medium-RS Series Double Stage Reverse Osmosis & Ultrapure Water System (Tap Water Inlet), Resistivity(25℃) 18.2MΩ.cm, No Endotoxin, No RNases, No DNases, HHitech

  • Brand:HHitech
  • Model:MO00730149
  • Availability:In Stock
RM29,740.00

Available Options


+ -

Description PDF

Ask Question About Product

Note: HTML is not translated!

 

Laboratory Water Purification System Selection Form (CLICK THIS LINK TO VIEW ALL THE MODELS)

 

Medium-RS Series Double Stage Reverse Osmosis & Ultrapure Water System (Tap Water Inlet)

Features and Advantages

 LCD (resolution: 240×128, dimension: 106×57mm) controlling system, intuitively display the system running state and various parameters.

 3 way online water quality sensor, detect the quality of feed water, RO water, deionized water, or ultrapure water respectively. And

warn once water quality’s standard exceeding.

 Cartridges replacing alarm function, based on time and water quality, show cartridges’ used and residual life.

 Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life ending.

 Auto self-flushing of RO membrane function, extend RO membrane’s life.

 Auto running data storing function through RS232/USB communication port to computer for 1 year at least (optional).

 Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.

 Water dispensing function- timing and quality (time range: 1-99min, water quality range: 0.1-18.2MΩ.cm).

 Built-in 2 set 15 liters airtight plastic pressure water tank, easier for installation and maintenance.

 External water tanks is optional to meet different need and assure ample water-supply.

 High-strength stainless steel shell with powder painting technics, avoid rusting and keep clean, to meet GLP standard.

 Floor type with wheels on the bottom design, convenient to move.

 3 door and easy-to-replacing cartridge design, convenient to maintain system and replace cartridges.

 Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure water’s quality.

 Long life and high-capacity pretreatment (including PP fiber, and active carbon cartridge), effectively protect RO membrane.

 RO module with DOW’s membrane, ensure long life, stable operation and high desalinization rate.

 Special high-capacity ultrapure polishing technology, to optimize pure water quality maximumly with minimum resin. With DOW’s top

polishing resin, ensure ultrapure water’s quality up to 18.2 MΩ.cm, with the lowest TOC level.

 Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria’s increase and reduce TOC.

 MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF.

 0.2µm PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.

 Medium series can be upgraded to touch screen system, just the same as Master to Master Touch.

 

 

Medium-R series is standard double stage reverse osmosis system. With 2 stage pump, 2 stage RO membrane and buffer tank, system achieves stable water quality, little drain, and low running cost.

 

Compared with singlestage RO system, the quality of RO water is better, and the running cost is lower for less consumables replacement. Moreover, compared with simple 2nd stage RO system (1 pump, 2 RO membrane, without buffer tank), its system design is more rational, and the RO quality is more stable. Even though with the worse source water, the 2nd stage RO water’s conductivity also can stay 1-5µs/cm. Medium-RS series is 2nd stage RO& ultrapure watersystem, with LCD controlling system, 3 way water quality sensor, timing and quality dispensing, stainless steel shell, built-in 2 set tanks (buffer tank and pressure tank). Its output ranges from 30 to 90 liters/hour. The 2nd stage RO water’s conductivity can stay 1-5µs/cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.

 Specifications

Model Medium-RS30/45/60/90 Medium-RS30/45/60/90UF Medium-RS30/45/60/90UV Medium-RS30/45/60/90UVF
Output -1st stage RO water* 30 series: 63 liters/hour, 45 series: 93 liters/hour,
60 series: 125 liters/hour, 90 series: 150 liters/hour
Output -2nd stage RO water* 30 series: 30 liters/hour, 45 series: 45 liters/hour,
60 series: 60 liters/hour, 90 series: 90 liters/hour
Output -ultrapure water* 30 series:<30 liters/hour, 45 series:<45 liters/hour,
60 series:<60 liters/hour, 90 series: <90 liters/hour
Pure water outlet 3: 1st and 2nd stage reverse osmosis water, ultrapure water
Ultrapure water quality  
Resistivity(25°C) 18.2MΩ.cm
TOC* <10ppb <10ppb <3ppb <3ppb
Bacteria <0.01cfu/ml
Particle(>0.2µm) <1/ml
Endotoxin N/A <0.001Eu/ml N/A <0.001Eu/ml
RNases N/A <1pg/ml N/A <1pg/ml
DNases N/A <5pg/ml N/A <5pg/ml
RO water quality  
Conductivity - 1st stage RO water Feed water conductivity×5%*
Conductivity - 2nd stage RO water 1-5µs/cm*
Feed water requirements Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2
Dimension and weight Length×Width×Height:640×540×1110mm / Weight: about 80Kg
Electrical requirements AC110-240V, 50/60Hz
Power 240W 240W 240W 360W
Standard configuration Main body (Including 1 set of cartridge)+built-in 15 liters pressure tank and buffer tank
Remarks:
*The value will be influenced by temperature and feed water’s quality.