Laboratory Water Purification System Selection Form (CLICK THIS LINK TO VIEW ALL THE MODELS)

Central Series Deionized Water (DI water) Purification System (Tap Water Inlet)

Features and Advantages

 Integration design

Integrating pretreatment filer (quartz sand and activated carbon), double stage reverse osmosis membrane, EDI module, 150 liters

buffer tank (for 1st stage RO water), 250 liters stainless steel tank (SUS304, for Edi water), pure water supplying and tube

circulation system into one standard product, to avoid big floor space, non-standard design process.

 Advanced PLC controlling system, comprehensive monitoring and warning function

With PLC controlling system, to control the system’s running, monitor and warn every parameter in whole water treatment process,

including no feed water, full water, water quality’s standard exceeding, abnormal water pressure, water level, flow velocity.

 Easy touch screen panel and optional running data storing function

All working status will be shown on the touch screen. And start-up and shut down of the pump and valve can be controlled through

the touch screen, button or switch (under the touch screen). Moreover, auto running data storing function through RS232/USB

communication port to computer is optional.

 Reliable safety

Separated design of water and electricity, using mass low-voltage apparatus in the most, multiple alarm function: no feed water, full

water, water quality’s standard exceeding, electric equipment’ protection against overload and short circuit, and so on.

 Good extension

Central series' deionized water could be feed water for Smart-D, Master-D and Dura series, to purify and enhance the water

quality from 15 to 18.2MΩ.cm, meeting the requirements of the highest grade I standard of ASTM, CAP, CLSI, EP and USP.

Integrating pretreatment filer (quartz sand and activated carbon), double stage reverse osmosis membrane, EDI module, 150 liters buffer tank (for 1st stage RO water), 250 liters stainless steel tank (SUS304, for Edi water), pure water supplying and tube circulation system into one body, Central R2E 250/500’s output ranges from 250 to 500 liters/hour.

The Edi / deionized water’s resistivity is more than 15 MΩ.cm, in the low running cost. It meets the requirements of pure water for mass production and lab central water supply.

Specifications