Frequency Vibration Type Insecticidal Lamp, Power: ≤ 35W, Design Life: ≥ 5 Years, Grid Voltage: 2300V ± 115V

Instrument Model:

Frequency-array insecticidal lamp is a kind of physical control method that uses insect phototaxis to trap and kill. Utilizing the characteristics of strong phototaxis, wave-like, color-rendering, and tropism information, the light's wavelength, waveband, and wave frequency are set within a specific range, and light and long-distance waves are used at close range to attract The sexual information generated by the pest itself lures the adult insect flutter lamp, and the lamp is accompanied by a frequency-vibrating high-voltage power grid to make the insects fall into the insect-infested bags under the lamp to achieve the purpose of killing insect pests. Widely used in agriculture, forestry, vegetables, warehousing, tea, tobacco, gardens, greenhouses, vineyards, aquaculture and other aspects.

Frequency array insecticidal lamp features:

1. Frequency vibration induced control technology, in line with GB/T 24689.2-2009 plant protection machinery frequency vibration pest control lamp standard.

2. The high-voltage power grid adopts arc-resistant coating materials with a diameter of 0.6mm and is spirally wound to prevent short circuit due to the residual electrical network of the insect body. The net spacing can be selected according to different target pests (generally ≤ 10mm).

3. Power grid over-current protection.

4. According to the living habits of target pests, an automatic segmentation (hours) incentive device can be added.

5. Insulation column: Instantaneous high temperature (1000°C), corrosion resistance, high pressure resistance, high voltage power grid continuous arc discharge in rainy day 30min, no insulation phenomenon of the insulation column.

6. Light control technology: According to day and night automatic switch lights.

7. The effective radius of a single lamp; farmland area is not less than 120m, the forest area is not less than 80m.

Frequency array pest control lamp technical parameters:

1. Trap light source: frequency vibration lamp (wavelength 320nm ~ 680nm)

2. Frequency vibration lamp color: yellow; the color of the insect bag: red

3. Power: ≤ 35W

4. Design life: ≥ 5 years

5. Insulation resistance: ≥ 2.5MΩ

6. Light source: 15W multi-wavelength trap lamp, ballast instant start

7. Power Supply: Applicable for nominal voltage 220V, allowing use of 380V and DC12V

　 Electronic ballast operating current: Current is not less than 220mA at 160V; Current is not greater than 420mA at 280V

8. When the working voltage is 200-280V, the lamp startup time ≤ 5S, no short circuit, arc phenomenon

9. When the working voltage is 160-200V, the lamp startup time is ≤ 15S, no short circuit, arc phenomenon

10. Impact area: ≥0.15m2

11. The grid voltage: 2300V ± 115V