Crude Fiber Tester, Power: 2800W, Power supply : AC220V/50HZ, Test Sample Number: 6 / Time, Weight: 30kg

Features:
CXC Series Crude Fiber Tester is based on the current commonly used acid and alkali digestion method to boil the sample, and weight determination to obtain the crude fiber content of the sample instrument. The crude fiber analyzer uses accurate concentrations of acids and bases to deconcoct the sample under specific conditions, and then removes the soluble matter with ethanol. After depleting the amount of minerals after high-temperature ignition, the crude fiber is called crude fiber. It is not an exact chemical entity, but is a summary of the ingredients that are determined under generally recognized mandatory conditions, where cellulose is predominant, and a small amount of hemicellulose and lignin are present. .

Crude Fiber Analyzer Technical Parameters:

• Determination of objects: a variety of food, feed, grain, food and other agricultural and sideline products in crude fiber content 
• Test sample number: 6 / time; 
• Repeatability error: crude fiber content below 10%, absolute Value error ≤ 0.4; 
• Crude fiber content above 10%, relative error ≤ 4%; 
• Determination time: about 100 minutes required on the instrument (including acid 40 minutes, alkali 40 minutes, suction filtration and washing about 20 minutes); 
• Power supply : AC220V/50HZ; 
• Power: 2800W; 
• Water supply: water pressure greater than 1.5pa, water temperature less than 20 degrees Dimensions: 670mmX450mmX670mm 
• Weight: 30kg.