Customer Service
0 item(s) - RM0.00

Center-EDI Series Deionized Water System (Tap Water Inlet), Output of EDI Water: 45 Liters/Hour, Resistivity: >10MΩ.cm, TOC<30ppb, Silicone Rejection Rate: >99.9%, HHitech

  • Brand:HHitech
  • Model:MO00730034
  • Availability:In Stock
RM76,626.00

Available Options


+ -

Description PDF

Ask Question About Product

Note: HTML is not translated!

 

Laboratory Water Purification System Selection Form (CLICK THIS LINK TO VIEW ALL THE MODELS)

 

Center-EDI Series Deionized Water System (Tap Water Inlet)

Featues and Advantages:

 7.0 inch colorful high-resolution touch screen (16:9) controlling system, achieve finger-touch new experience.

 3 way online water quality sensor, detect the quality of 1st stage, 2nd stage RO water, deionized water, Edi water or ultrapure water respectively. And warn once water quality’s standard exceeding.

 2 way flow sensor, achieve quantified dispensing of 2nd stage RO water, deionized water, Edi water or ultrapure water.

 Integrate with EDI module (EDI series), without softener, chemical regeneration and replacing any DI cartridge, Its pure water’s resistivity will be above 10MΩ.cm(25℃), and TOC is lower than 30ppb.

 Double stage reverse osmosis technology, assure 2nd RO water quality’s stability from different source water.

 System sanitizing procedure, achieve the disinfection of ultrapure water’s tube and valve.

 System circulation function, achieve ultrapure water’s circulation to keep top quality of ultrapure water.

 All Cartridges replacing alarm function, based on time, or water quality, show cartridges’ used and residual life.

 Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life ending.

 Auto self-flushing of RO membrane function (interval and continuous time setting), extend RO membrane’s life.

 Auto running data storing function with built-in SD card, and data can be exported through the USB interface.

 Comprehensive Information query and management function, master system status, water quality, cartridges usage and alarm information.

 System time setting (year/month/day/hour/minute), timing standby (0-60 minute), and timing shutdown (0-24 hour) function.

 Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.

 Built-in 20 liters PE tank and 20 liters airtight plastic pressure water tank. Also external tanks is optional.

 Whole plastic shell with high-strength, avoid rusting and keep clean, to meet GLP standard.

 3 door and easy-to-replacing cartridge design, convenient to maintain system and replace cartridges.

 Detachable water collector design, store water-drop to avoid water’s splashing, and convenient for cleaning.

 Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure water’s quality.

 Optimized pretreatment (including PP fiber, KDF and active carbon cartridge), effectively protect RO membrane.

 RO module with DOW’s membrane, ensure long life, stable operation and high desalinization rate.

 Ultrapure cartridge with DOW’s top polishing resin, ensure ultrapure water’s quality up to 18.2 MΩ.cm, with the lowest TOC level.

 Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria’s increase and reduce TOC.

 MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF.

 0.2µm high flux PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.

 

 

With 7.0 inch touch screen system, 3 way water quality sensor, 2 way flow sensor for quantified dispensing, 2 stage RO system and EDI module, Center-EDI series deionized water system is top choice of deionized water for general grade experiments.

 

With tap water inlet, its output ranges from 45 to 90 liters/hour. It can produce 2nd stage RO water and deionized water. The 2nd stage RO water’s conductivity can stay 1-5μs/cm, and the deionized water’s resistivity absolutely reaches to 10MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water.

Specifications

Model Center-EDI 45D Center-EDI 60D Center-EDI 90D
Output -EDI water* 45 liters/hour 60 liters/hour 90 liters/hour
EDI water quality  
Resistivity >10MΩ.cm
TOC* <30ppb
Silicone rejection rate >99.9%
Bacteria <0.01cfu/ml
Particle(>0.2&Micro;m) <1/ml
RO water quality  
Conductivity - 1st stage RO water Feed water conductivity×5%*
Conductivity - 2nd stage RO water 1-5&Micro;s/cm*
Feed water requirements Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2
Dimension and weight Length × Width × Height: 610×585×1580mm / Weight: about 70Kg
Electrical requirements AC110-240V, 50/60Hz
Power 480W
Standard configuration Main body (Including 1 set of cartridge)+built-in 20 liters PE tank and 20 liters pressure tank
Remarks:

*The value will be influenced by temperature and feed water´s quality.