Ask Question About Product
Note: HTML is not translated!
Laboratory Water Purification System Selection Form (CLICK THIS LINK TO VIEW ALL THE MODELS)
Super series ultrapure water stem (tap water inlet)
Features and advantages:
- 7.0 inch colorful high-resolution touch screen (16:9) controlling system, achieve finger-touch new experience.
- 4 way online water quality sensor, detect the quality of feed water, 2nd stage RO water, Edi water and ultrapure water respectively. And warn once water quality´s standard exceeding.
- 3 way flow sensor, count source water consumption and achieve quantified dispensing of Edi and ultrapure water.
- Integrate with Ionpure EDI module, the maximum output is 240 liters per day.
- Built-in independent online TOC monitor module (Super-TOC).
- Double stage reverse osmosis technology, assure 2nd RO water quality’s stability from different source water.
- Built-in 3 pump- 1st stage RO pump, 2nd stage RO pump and circulating sanitizing pump.
- All Cartridges replacing alarm function, based on time, flux and water quality, show cartridges´ used and residual life.
- Multiple alarm function: no feed water, full water, water quality’s standard exceeding, cartridge life ending and leakage.
- Auto self-flushing of RO membrane function (interval and continuous time setting), extend RO membrane’s life.
- Auto running data storing function with built-in SD card, and data can be exported through the USB interface.
- System continuous upgrading function through USB interface, and WIFI module is optional.
- Built-in perpetual calendar clock for cartridges and service setting.
- System sanitizing procedure, achieve the disinfection of ultrapure water’s tube and valve.
- System circulation function, achieve ultrapure water’s circulation to keep top quality of ultrapure water.
- Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.
- Attached 50 liters water tank with conical bottom, including air filter, to prevent co2 and bacteria. Also external tanks is optional.
- Whole plastic shell with high-strength, avoid rusting and keep clean, to meet GLP standard.
- 4 door and easy-to-replacing cartridge design, convenient to maintain system and replace cartridges.
- Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure water’s quality.
- Optimized pretreatment (including PP fiber, KDF and active carbon cartridge), effectively protect RO membrane.
- RO module with DOW’s membrane, ensure long life, stable operation and high desalinization rate.
- Ultrapure cartridge with DOW’s top polishing resin, ensure ultrapure water’s quality up to 18.2 MΩ.cm, with the lowest TOC level.
- Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria’s increase and reduce TOC.
- MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF.
- (0.45+0.1)µm double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.
With 7.0 inch touch screen system, 4 way water quality sensor, 3 way flow sensor for quantified dispensing, Ionpure EDI module, built-in TOC module, 2 stage RO and 3 pump system, Super series is topchoice of ultrapure water for high grade experiments.
With tap water inlet, its output is 10 liters/hour. It can produce Edi water and ultrapure water. The Edi water’s resistivity is above 5MΩ.cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
Specifications |
Model | Standard | Eliminating endotoxin | Low TOC | Synthesizing | Built-in TOC module | |
Super 10 | Super 10F | Super 10V | Super 10FV | Super-TOC10V | Super-TOC 10FV | |
Output-EDI water* | 10 liters/hour | |||||
Output-ultrapure water | Up to 2 liters/minute (when tank is full) | |||||
Ultrapure water quality | ||||||
Resistivity(25°C) | 18.2MΩ.cm | |||||
TOC* | <10ppb | <10ppb | <3ppb | <3ppb | <3ppb | <3ppb |
Bacteria | <0.01cfu/ml | |||||
Particle(>0.1µm) | <1/ml | |||||
Endotoxin | N/A | <0.001Eu/ml | N/A | <0.001Eu/ml | N/A | <0.001Eu/ml |
RNases | N/A | <1pg/ml | N/A | <1pg/ml | N/A | <1pg/ml |
DNases | N/A | <5pg/ml | N/A | <5pg/ml | N/A | <5pg/ml |
EDI water quality | ||||||
Resistivity(25°C) | >5MΩ.cm | |||||
TOC* | <30ppb | |||||
Silicon rejection rate | >99.9% | |||||
Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |||||
Dimension and weight | Length×Width×Height:545×470×639mm, 28Kg | |||||
Electrical requirements | AC200-240V, 50/60Hz | |||||
Power | 240W | |||||
Standard configuration | Main body (Including 1 set of cartridge)+50 liters PE tank (TOC model:+ built-in TOC module) |
Remarks:
*The value will be influenced by temperature and feed water´s quality.